Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterTrusted Garage Door Installation for Denton Homeowners
A new garage door in Denton typically runs $700 to $2,200 installed, depending on size, material, and whether you’re replacing a single or double door. We’ve installed and replaced garage doors across Denton since 2015, and every job starts the same way: a written price and written scope before any work begins. Learn more about our Garage Door Installation in Denton. That’s Clause 1 of The Haven Standard, and it’s not negotiable. Call (940) 398-6880 and you’ll speak to a real person who can schedule a measure, not a recording that routes you to a callback window.
Marcus Deller runs our Denton operation, and the rule he built the company on is simple. Before we quote a replacement, you see the failed part. That photo record is part of every visit, and it’s why homeowners who research before they call tend to end up here. You’ll know what we found, what it costs, and what you’re getting before you spend a dollar.
What Our Garage Door Installation Service Includes
New Door Installation
New Door Installation means removing the existing door, tracks, and hardware, then installing a complete system from the ground up. We handle this when the current door is beyond repair, or when you want to change the look and function of your garage entrance. Servo Garage Doors Denton measures the opening, orders the correct door for your frame, and installs it with new tracks, springs, rollers, and weather seal. You get a written price for the entire job before the first tool comes off the truck.
Single Car Door
Single Car Door installations are typically 8 to 9 feet wide and serve one bay of your garage. We install steel, wood, and custom single doors across Denton, including older homes in the downtown historic districts where openings aren’t always square. The install includes new spring assemblies matched to the door weight, so you’re not reusing a spring that was sized for a different door. We photograph the old hardware before removal, so you can see exactly why the previous door failed.
Double Car Door
Double car doors span 16 feet or more and weigh enough that spring calibration is critical to safe operation. We install double doors in Denton neighborhoods like Robson Ranch, Southridge, and Idiot’s Hill, where wide garages are common in homes built after 2000. Every double door installation includes a torsion spring system matched to the door’s exact weight, which is the difference between a door that opens smoothly for ten years and one that binds in six months.
Custom Garage Door
Custom garage doors are built to non-standard dimensions or specifications, from odd widths in mid-century homes to specific window patterns in newer construction. We order from manufacturers who build to spec, and we document the measurements in writing before the order is placed. If your garage opening isn’t a standard size, you’ll still get a flat written price, not a per-inch surcharge that shows up after the fact.
Steel Doors
Steel doors are the most common choice in Denton for good reason: they handle the North Texas heat and occasional hail without warping, and they cost less than wood. We install steel doors from Clopay and Amarr, with insulation options ranging from basic single-layer construction to full polyurethane-insulated panels. Steel is also the easiest material to match to existing trim and paint, which matters if you’re replacing one door on a two-car garage and want them to look identical.
Wood Doors
Wood garage doors are heavier, pricier, and require more maintenance than steel, but nothing matches the look on a craftsman or Spanish-style home. We install wood doors in Highland Village and Corinth as well as Denton proper, and we’re direct about what wood requires: regular sealing, repainting every few years, and spring assemblies sized for the extra weight. The written scope includes the spring rating and the maintenance schedule, so the real cost of wood isn’t a surprise later.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Garage Door Installation
We install and service Clopay doors more than any other brand in Denton, and we order their steel and wood lines directly for most residential jobs. Their steel doors hold up well in the Texas sun, and the insulation options give homeowners real control over garage temperature. We also work extensively with Amarr, particularly their Classica and Stratford collections, which are common choices on newer homes in the Denton and Corinth area.
Wayne Dalton doors come through our shop regularly as well, especially their carriage-house style doors that mimic wood grain without the maintenance. We stock OEM parts for all three brands on the trucks, which means a spring replacement or roller job doesn’t wait on a parts order. Whether your existing door is a Clopay, Amarr, Wayne Dalton, or any other make, we’ll quote the replacement with a written price before any work starts.
BeforeAfterSigns You Need Garage Door Installation Right Now
- Your door sags in the middle when closed. A door that bows inward at the center line usually means the panel structure is failing, and no spring adjustment fixes a compromised door. In Denton’s summer heat, a sagging door gets worse fast as the metal expands and contracts.
- The bottom panel is rotted, dented, or separating. The bottom panel carries the most weight and takes the most weather. If it’s visibly damaged, water and pests are getting in, and the door is no longer sealing your garage against Denton’s occasional heavy rain.
- You hear grinding or popping during operation. Grinding usually means rollers are worn or the tracks are misaligned; popping often indicates a spring issue. When the cause is a door that’s too heavy for its existing spring system, the fix is a properly matched new installation, not another spring replacement.
- Your energy bills climb and the garage feels like an oven. An uninsulated or failing door lets Denton’s July heat pour into an attached garage, which loads your AC. Replacing it with an insulated steel door can make a measurable difference in how that room feels.
- The door is 15 years old and you’re repairing it every year. At a certain point, the yearly repair tab approaches the cost of a new door. We’ll show you the photo record of what’s failing, give you a written comparison of repair versus replacement, and let the numbers make the argument.
Our Garage Door Installation Process - Step by Step
- 1
Measure and document. We measure the opening, check the framing for square, and photograph the existing door and hardware. You get those measurements in writing, along with the scope of what we found. Nothing is quoted until we’ve seen the actual opening, not a model number over the phone.
- 2
Written price and scope. You receive a flat written price for the full job, including the door, hardware, installation labor, and haul-away of the old door. This is Clause 1 in action. If we find something unexpected during install, we stop and show you before any additional cost is discussed.
- 3
Removal and prep. The old door, tracks, and springs come out. We inspect the framing and mounting points for rot or separation before the new door goes in. If the frame needs work, you see photos and get a written quote for that work before we touch it.
- 4
Installation and calibration. The new door goes in with springs matched to its exact weight, rollers set to the track, and opener brackets verified for alignment. We cycle the door multiple times to confirm balance and smooth travel, then document the completed job with photos.
- 5
Photo record and walkthrough. Before we leave, you get a documented record of what was found, what was replaced, and what the finished install looks like. We walk you through the new door’s operation, spring cycle rating, and maintenance schedule. Clause 4 says you see the failed part before anyone quotes a replacement, and it applies at the end of the job too: you see the proof of what was done.
How Much Does Garage Door Installation Cost in Denton?
A single-car steel door installation in Denton typically runs $700 to $1,400, while a double-car steel door lands between $1,100 and $2,200. For more details, see our Garage Door Installation cost guide. Wood doors run higher on both ends because of material weight and finishing requirements. Custom sizes and window inserts add to the base price, and we itemize every one of those additions in the written quote.
| Installation Type | Typical Range |
|---|---|
| Single-car steel door | $700-$1,400 |
| Double-car steel door | $1,100-$2,200 |
| Wood door (single) | $1,200-$2,200 |
| Custom door (varies widely) | $1,400-$3,500+ |
| Related: spring replacement | $180-$340 |
| Related: opener installation | $250-$550 |
What affects the price in Denton? Door width and weight, insulation rating, window placement, and whether the existing tracks and opener can be reused. What doesn’t affect it: how your house looks, how nice your car is, or how urgent we think you are. We don’t charge urgency premiums. The price you get in writing is the price you pay, and if something changes during the job, you approve it in writing before a dollar moves.
Garage Door Installation Near Denton - Our Service Area
We install garage doors throughout Denton and the surrounding North Texas communities, including Corinth, Highland Village, Flower Mound, Little Elm, Lewisville, The Colony, Southlake, Frisco, Prosper, Coppell, and Grapevine. Most installation measures in Denton proper happen within one to two business days, and we schedule installation dates at the measure, not through a dispatcher. If you’re in Corinth and want a local team, our Garage Door Installation in Corinth page covers that area specifically. In Highland Village, see Garage Door Installation in Highland Village for details on service there.
Serving Denton, TX - Our Local Coverage Area
We’re based in the Denton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Garage Door Installation in Denton
Garage door installation is the complete replacement of your garage’s door, tracks, springs, rollers, and weather seal with a new system. It’s different from repair, which addresses individual components like a spring or panel. Installation is called for when the door itself is failing, when you want a different material or style, or when the existing door is too heavy or too old to be worth repairing.
For a standard single or double door replacement, the physical installation takes three to six hours on-site. Custom doors add measuring and manufacturing time, usually two to four weeks from order to install. We schedule the install date at the time of the measure, and you get that date in writing alongside the price. Call (940) 398-6880 to schedule a measure and get a timeline for your specific opening.
Expect $700 to $2,200 for most residential installations in Denton, with wood and custom doors running higher. The exact number depends on the door size, material, insulation, and any additional work like frame repair. You’ll get a flat written price before we start, and the price does not change once you approve it. For a detailed breakdown, see the cost section above, or call us at (940) 398-6880 and we’ll walk through it.
Yes. We install and service Clopay doors across Denton, including their steel and wood lines, and we stock Clopay OEM parts on our trucks. If you have an existing Clopay door that’s failing, we’ll document the failure with photos and quote either a repair or a replacement in writing. The same applies to Amarr, Wayne Dalton, Genie, and any other major brand you already own.
Emergency installation is rare; installation is scheduled work, not an emergency call. What we do offer 24/7 is emergency garage door repair, answered by a live person at (940) 398-6880. If your door is stuck open, off its tracks, or won’t close, call us any time and we’ll dispatch a technician with a written diagnosis and quote before any repair work begins.
Every new door carries the manufacturer’s warranty on the door and panels, and our installation work is covered by the 365-Day Done Right Promise. If something isn’t done right within a year, we make it right. That promise is backed by The Haven Standard, not a handshake, and the warranty terms are written on your quote. You’ll know exactly what’s covered before you pay.
Clear the door’s travel path inside the garage, remove anything leaning against the interior walls near the track, and move vehicles out of the bay. We’ll handle the rest: removing the old door, hauling it away, and protecting the surrounding area while we work. If you have questions about your specific garage setup, call us before the scheduled date and we’ll tell you what to move and what can stay.
Schedule Your Garage Door Installation Service in Denton Today
Call (940) 398-6880 to schedule a free measure and get a written price for your new garage door. You’ll speak with a real person, get a named technician, and receive the full scope in writing before any work is approved. No pressure, no “today only” pricing, and no invoice surprises. We serve Denton and the surrounding cities with the same standard: documented, written-price-first installation that you can verify at every step.
Written by Marcus Deller, Owner at Servo Garage Doors Denton, serving Denton since 2015.